Fall protection 1

Fall Protection Means More than Just a Harness

Elevated work situations are a necessary part of many construction and maintenance projects. Such environments carry a significant potential for significant injury or death from falling, which is why proper fall protection is a critical component of safety programs for those projects.

Unfortunately, proper fall protection and the correct use of personal protective equipment are not always well-understood, creating both a false sense of security and the very real prospect of danger. A worker may believe that he’s safe because he’s wearing a high-quality lanyard and has connected it to part of the structure. However, that’s not always the case.

Fall protection 1

Identifying safe anchorage points

Personal fall-protection equipment cannot help a worker if it is used improperly, and one of the most common misuses is failing to tie off to a safe anchorage points. Just because something is attached to the structure or is made of a material such as steel does not ensure that it provides a safe anchorage.

OSHA mandates that anchorage points be able to withstand 5,000 pounds of force. When choosing an anchorage point, it’s also important to consider whether more than one worker will be tied to it at the same time, because that will affect the maximum force.

The best way to identify safe anchorage points is to do it before you need them. Before the project begins, identify and mark spots that will provide safe anchorage when needed. Consider the highest possible tie-off locations and where staff will be working in relation to the anchorage points. That way, workers won’t have to guess where they should tie off, and they’re less likely to tie off to a site that can’t safely support them.

Location is just as important

When manufacturers test products such as retractable or shock-absorbing lanyards, they usually do so in a vertical situation. The fall distance is generally determined by measuring from the anchorage point, along the length to which the lanyard will stretch out, plus the length of the body. When computing the fall distance, it’s a good idea to add a safety factor of an additional three feet to allow for problems with the equipment, miscalculating the distance, or an unusually tall worker. The harness should be tight, and freefall distance should be minimized, because this will reduce recoil and stretch, and the forces they place on the body.

Horizontal aspects also need to be considered, because a fall may produce a pendulum effect, in which a suspended worker swings back and forth – sometimes into other workers, the structure, moving equipment, or hot work. That’s why most manufacturers recommend no more than a 30 percent offset from the anchorage point to the body position.

Another situation that sometimes occurs is when a worker will be performing tasks at multiple locations on a roof or open floor area, and chooses a 50-foot retractable lanyard for convenience, believe that once it’s secured, he can move anywhere in that range. However, if he stretches the lanyard out horizontally and falls over the edge, he’ll fall the full distance before the safety clutches can kick in. The ground or another surface may stop him before his protective equipment has the chance.

Oh yea, one last thing…..develop a rescue plan!
Fall Protection 2

Suppose a worker slips off the edge and his fall protection equipment works flawlessly. He’s safe, right? Not necessarily. If he’s suspended in the air, you’ll generally have less than five minutes to bring him down before he can begin to lose circulation in his legs and even develop blood clots. If the pressure is relieved too quickly, the sudden rush of blood through the circulatory system can lead to other problems.

That’s why it’s so important to develop your own rescue plan for all of the elevated aspects of your project before work begins. The plan should address how you’ll recover workers who are conscious, and what type of equipment on the site – such as vertical lifts, manlifts, or ladders – are available. It should also include training for employees in the area.

If workers don’t know the proper rescue procedures, they may complicate the situation. For example, a worker who reaches down to grab the lanyard and pull his co-worker to safety can easily injure himself, creating a need for two elevated rescues. If the suspended worker is unconscious or has significant injuries, pulling him up may worsen his condition and make it more difficult for the rescue team to provide assistance.

Knowledge is the best protection

Workers who assume that fall protection is as simple as tying off to what looks like a safe anchorage can become complacent about safety, as can supervisors who think things are great as long as everyone has the right equipment. In both cases, they’re wrong. Companies that want to protect workers from falls need to place a high priority on training everyone involved. In addition to proper identification of anchorage points and use of equipment, that training should ensure that everyone knows what to do when a mishap occurs. That knowledge makes the difference between having only a perception of safety and achieving effective protection.

For information on Fall Protection classes, visit our website at www.safetylinks.net

 

IOA Risk Services

Don’t Let Bad Habits Lead to a Lifetime of Injuries- Laying Stones

Each year 31,000 construction workers in the U.S. seek medical attention for strains and sprains caused due to their job. Overexertion can easily lead to injuries if not treated or are overlooked.

This next video shows an experienced stone mason and her tender kneeling to lay stone. Eventually, after several days on this specific job, they developed lower back injuries due to bad ergonomics and were missing preventative ways to keep this from happening. Watch this clip to help steer away from the bad habits shown and use as a reminder of corrective procedures to avoid this happening to you and your employees.

{"video":"http://youtu.be/Sh-p6QRHUTY","width":"400","height":"300"}

For information on Ergonomics Awareness courses, visit our website at www.safetylinks.net

 

IOA Risk Services

ACCSH & NACOSH Advise OSHA

A meeting between the Advisory Committee on Construction Safety and Health (ACCSH) and the National Advisory Committee on Occupational Safety and Health (NACOSH) on Dec. 14 – 16 was held in order to advise OSHA on workplace and health issues and regulations at the Department of Labor headquarters in Washington, D.C.

OSHA was recommended by the ACCSH that they develop two different Backing Operations Web pages to separate: 1) hazards in construction and general industry and 2) operating equipment with an obstructed view in any direction of travel. Other recommendations were additions to OSHA’s next Standard Improvement Project and basic principles for developing an injury and illness prevention programs proposal to effectively address multi-employer construction in workplaces.

From NACOSH, OSHA received recommendations to: 1) to keep the injury and illness prevention program proposed rule as the highest priority on the agency’s Regulatory Agenda; 2) to enhance its efforts to issue the proposed silica rule so that the public hearing and comment period can commence and to protect workers from this serious workplace hazard; and 3) to support and fund, along with the National Institute for Occupational Safety and Health and other appropriate parties, a symposium to present best practices of small, medium, and large workplaces on injury and illness prevention programs.

For more information, visit www.OSHA.gov

Written Programs

Now offering a FREE Safety Improvement Assessment for your company!

We are now offering a free-of-charge, non-bias, non-governmental Safety Improvement Assessment that has been specifically designed to pinpoint your safety and environmental needs. If you have a couple of hours to meet with us, we will help you go over your written programs, record keeping system, and conduct a site walk. An easy-to-follow action plan for improvement will be given to you at the end.

Our hope is that you continuously improve your safety and environmental performance!

Written Programs

All appointments will be scheduled on the 1st Friday of every month. We will serve up to 4 companies per day. Look below to see which month will be available to you for an appointment depending on your company’s location:

March: Orange County

April: Seminole County

Lake, Polk, Volusia, and Brevard Counties will be scheduled to a month soon!

 

This is available on a first come, first serve basis. To book your no-cost Safety Improvement Assessment now, contact Randy Free at 407-353-8165 or email us at info@SafetyLinks.net

 

 

IOA Risk Services

Fall Prevention Leading Edge Work

As an employer, are you taking a serious responsibility to provide a safe work environment and require your employees to wear protective equipment at all times?

Deathly falls due to leading edge work can be prevented by using a temporary horizontal lifeline. This includes a horizontal cable attached to 2 or more anchors points on the roof. It works mainly because their harness is secured to the roof’s structure and not an individual anchor point.

The video for today how this can be done at a construction site while workers are applying sheet metal roof decking on an tall engineering building.

{"video":"http://youtu.be/6ISfka_Fs7g","width":"400","height":"300"}

For more information on Fall Protection classes, visit our website at https://safetylinks.net/

 

IOA Risk Services

Prevent a Reroofing Slip and Fall

With today’s video, employers can brush up again on their safety standard methods to help provide a safe work environment for their employees. While re-roofing in construction sites, it is highly
IOA Risk Services

Bridge Decking Death Accident Prevention

There are several ways to ensure that workers are secured at a construction setting. OSHA’s fall protection standards are extremely important and help save hundreds of lives every year when followed